External Connections 139ConnectingConnect the camcorder to the VCR using Connection C. Refer toConnection Diagrams (0 128).Recording1 External recorder: Load a blank cassette or disc and set therecorder to record pause mode.2 Turn on the camcorder and set it to mode.• We recommend powering the camcorder using the compact poweradapter.• Verify that 6 8 [AV/Headphones] is set to [H AV].3 Camcorder: Locate the scene or story you wish to copy andpause the playback shortly just before the desired scene.4 Camcorder: Resume playback.By default, onscreen displays will be embedded in the output videosignal. You can change the displays by repeatedly pressing h(0 116).5 External recorder: Start recording when the scene you wish tocopy appears; stop recording when it ends.6 Camcorder: Stop playback.Uploading Movies to Video Sharing Web SitesYou can convert your high-definition scenes into standard-definitionmovies in the camcorder and then use the supplied PIXELA’s softwarein order to upload them to your favorite video sharing Web site. Youcan even decorate scenes so your unique decorations will be embed-ded in the converted SD movies.If you are using an Eye-Fi card, you can upload the standard-definitionscenes wirelessly, directly from the camcorder. Refer to Eye-Fi’s home-page for the latest information on compatible Web sites.InstallationInstall the software before you connect the camcorder to the computerfor the first time. Refer to the Installation Guide (supplied leaflet) and
