Additional Information 215LCD screen has been dimmed Use the [LCD Backlight] setting to change the brightness- Change the q > [LCD Backlight] setting to [Normal] or [Bright].May not be possible to record movies on this memory card- You may not be able to record movies on a memory card without a Speed Class rating.Replace the memory card with one rated SD Speed Class 2, 4, 6 or 10.Mem. Card Number of scenes already at maximum- The memory card already contains the maximum number of AVCHD scenes (3,999 scenes);no further scenes can be copied onto the memory card. Delete some scenes (A 60) to freesome space.Mem. Card Unable to recognize the data- The memory card contains scenes recorded using a video configuration that is not supported(PAL or SECAM). Play back the recordings in the memory card with the device originally usedto record them.Memory card cover is open- After inserting a memory card, close the memory card slot cover.Memory card is full- The memory card is full. Delete some recordings (A 60, 134) to free some space or replacethe memory card.Memory card is write-protected- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi-tion of the LOCK switch.Memory card writing error Attempt to recover the data?- This message will appear the next time you turn on the camcorder if power supply was acci-dentally interrupted while the camcorder was writing to the memory. Select [Recover] to try torecover the recordings. If you inserted a memory card that contains scenes recorded usinganother device, we recommend that you select [No].Need to recover files from the memory card. Change the position of the LOCK switch on thememory card.- This message will appear the next time you turn on the camcorder if power supply was acci-dentally interrupted while the camcorder was writing on the memory card and later the posi-tion of the card's LOCK switch was changed to prevent erasure. Change the position of theLOCK switch.No memory card- Insert a compatible memory card into the camcorder (A 39).- The memory card may not be inserted correctly. Insert the memory card all the way into thememory card slot until it clicks.-/, Not enough available space- Delete some recordings on the memory card (A 60, 134) or select the [3 Mbps] bit rate forthe conversion to SD.
