Canon VIXIZ HFM30 Instruction Manual

Also see for VIXIA HF M30: Software guide Instruction manual Reference guide Firmware update procedure Instruction manual

Contents

Canon VIXIZ HFM30 Instruction Manual Manual pdf 32 page image

External Connections ! 125NOTES• To correctly play back movies recorded with x.v.Color (" 156) on anHDTV compatible with this standard, additional settings may berequired on the connected HDTV. Refer to the TV’s instruction manual.• We recommend powering the camcorder using the compact poweradapter.• Connection $: When you play back your 16:9 movies on standard TVsets with a 4:3 aspect ratio, the TV set will switch automatically to wide-screen mode if it is compatible with the Video ID-1 system. Otherwise,change the aspect ratio of the TV manually.!"#$126 ! External ConnectionsSaving and Sharing Your Recordings! Copying Recordings to a Memory CardYou can copy your recordings only one-way: from the built-in memoryto the memory card. Scenes and photos will be copied from the indexscreen you selected to the corresponding index screen on the memorycard.Please read the IMPORTANT section (" 128) before using an Eye-Ficard.Copying Scenes1 Open the index screen that contains the scenes you want to copy.• Check that you have selected the # tab (built-in memory).• [Original] or [Video Snapshot] ! [Original] index screen: To copy allthe scenes recorded on a specific date, narrow down the scenesshown to scenes recorded on that date (" 55).2 Touch [%] to open the scene selection screen.When you copy scenes from the [Playlist] index screen (including theplaylist of video snapshot scenes), you cannot select individual scenes;instead, the entire playlist will be copied. Skip directly to step 4.3 Touch on the individual scenes you want to copy.• A checkmark & will appear on scenes selected. Touch a selectedscene again to remove the checkmark.• To select all the scenes at once: Touch [Select All] instead oftouching individual scenes. (Remove in advance any checkmarksfrom scenes you may have selected individually.)4 Copy the scenes.* Touch [Stop] to interrupt the operation while it is in progress.Operating modes:[Edit] ( [Copy ($)] ( [Yes]* ( [OK]!"#$External Connections ! 127Copying a Single Photo1 In single photo view, select the photo you want to copy.Check that you are viewing photos recorded in the built-in memory. (#appears next to the photo number.)2 Touch the screen to display the playback controls.3 Copy the photo.4 Drag your finger left/right to select another photo to copy or touch[#].Copying Photos from the Index Screen1 Open the [Photos] index screen.Check that you have selected the # tab (built-in memory).2 Touch [%] to open the photo selection screen.3 Touch on the individual photos you want to copy.• A checkmark & will appear on photos selected. Touch a selectedphoto again to remove the checkmark.• To select all the photos at once: Touch [Select All] instead of touchingindividual photos. (Remove in advance any checkmarks from photosyou may have selected individually.)4 Copy the photos.* Touch [Stop] to interrupt the operation while it is in progress.Operating modes:Operating modes:[Edit] ( [Copy ($)] ( [: Proceed] ( [Yes][Edit] ( [Copy ($)] ( [Yes]* ( [OK]!"#$128 ! External ConnectionsIMPORTANT• Observe the following precautions while the ACCESS indicator is on orflashing. Failing to do so may result in permanent data loss.- Do not open the memory card slot cover.- Do not disconnect the power source or turn off the camcorder.- Do not change the camcorder’s operating mode.• When copying photos onto an Eye-Fi card, photos will be uploadedautomatically if you are within the range of a configured network. Alwaysverify that Eye-Fi cards have been approved in the country/region ofuse. See also Using an Eye-Fi card (" 146).NOTES• If the memory card slot cover is open, or the LOCK switch on the mem-ory card is set to prevent writing, you will not be able to copy recordingsto the memory card.• Scenes that were edited using the supplied software ImageMixer 3 SEand were then written back to the camcorder cannot be copied to thememory card.• If there is not enough space on the memory card, as many photos aspossible will be copied before stopping the operation.Saving Recordings on a ComputerMovies recorded with this camcorder are saved in the built-in memory(! only) or on the memory card. Because space is limited,make sure to save your recordings on a computer on a regular basis.Saving MoviesWith the supplied software ImageMixer 3 SE you can save scenes toyour computer. If necessary, video files previously saved on acomputer can be restored back to the camcorder. The software alsooffers many options for organizing your video library, editing video andmore.InstallationSee ‘PIXELA Applications’ Installation Guide.!"#$