Canon WFT-E8 Instruction Manual

Also see for WFT-E8: User guide Guide

Contents

Canon WFT-E8 Instruction Manual Manual pdf 11 page image

11Set the camera’s power switch to <2> before attaching thetransmitter.The transmitter is powered by the camera. Ensure the camerabattery has sufficient charge. If the battery level drops to 19% orless, you cannot transfer captured images.1 Open the terminal cover on thecamera. Pull out the system extensionterminal cover and rotate it toward thefront.2 Attach the transmitter. Align the transmitter terminal andattachment pin with thecorresponding camera terminal andhole. Push the terminal firmly into thecamera. As you push the terminal into thecamera with your left index finger,turn the tightening screw until it stopsrotating to attach the transmittersecurely.Removing the transmitter Set the camera’s power switch to <2>. Loosen the tightening screw until it spins freely. Pull the terminal out of the camera.Attaching to the Camera