28This is a connection mode when using a wireless LAN terminal compatible with Wi-Fi ProtectedSetup (WPS). In PIN code connection mode (PIN mode), an 8-digit identification numberspecified on the camera is set on the wireless LAN terminal to establish a connection.Even if there are multiple wireless LAN terminals active in your area, this is a relatively reliablemethod of establishing a connection using a shared identification number.It may take about one minute to establish connection.Connection may not be possible if stealth functions are enabled on the wireless LANterminal. Deactivate stealth functions.1 Select [WPS (PIN mode)].Turn the <5> dial to select [WPS (PIN mode)],and then press <0>.Select [OK] and press <0> to go to the nextscreen.2 Specify the PIN code on the wirelessLAN terminal.On the wireless LAN terminal, specify the 8-digitPIN code shown on camera LCD monitor.For instructions on setting PIN codes on thewireless LAN terminal, refer to the instructionmanual of the wireless LAN terminal.Select [OK] and press <0> to display theconfirmation screen.3 Establish a connection with thewireless LAN terminal.Select [OK] and press <0> to establish aconnection with the wireless LAN terminal.When the connection with the wireless LANterminal is established, the [Network] screen(p.29) is displayed.WPS Connections (PIN Mode)COPY
