Canon XAPSHOT RC-250 Instructions Manual

Also see for XapShot RC-250: Instructions

Pictures cannot • A TV is not connected correctly Correct connections. 30be viewed. to the camera.• The main sw itch is no t at PLAY. Set the main switch to PLAY. 33• Video flopp y disk is blank. Load a recorded video floppy disk.• The automatic stop feature is Press the shutter button halfw ay . 34activated.• The TVlVideo switch of the TV , Set switches correctly.RFlVideo selector of AC coupler See the instruction manuals of theor the channel swit ch of the RF TV, AC coupler or RF unit.unit is not set correctly.Pictures cannot • The main switch is not at Set the main switch to ERASE 36be erased. ERASE (PLAY). (PLAY).• The erasure prevention tab of Cover the tab area with a seal or 9the video floppy disk has broken tape.off.Pictures do not • A motor or other noise source is Remove the noise source.look clear. near the camera or the TV.• The video floppy disk is If there are no problems when adefective. different disk is used for viewing ,the disk might be damaged. Donot use defective disks.• The video head is dirty . Clean the video head. 3938