Canon XJ100x9.3B AF Operation Manual

Also see for XJ100x9.3B: User guide

Contents

E112 PREPARATION2-6 Setting on the Information DisplayThe table below shows the functions that can be set from the information display. For the detailed setting method, refer tothe “Display Operation Manual” at the end of this Operation Manual.Functions that can be set from the information displayReferencepage inappendixesLens name Lens code setting E4Initialize operation Initialize operation setting E4Iris controlIris gainSetting the auto iris gain E4, E5Setting the remote iris gain E5Setting the iris correction to ON/OFF E5Setting the iris close detection to ON/OFF E6Zoom controlSetting the zoom servo start characteristics E6Setting the zoom servo stop characteristics E6Setting the zoom mechanism end stop characteristics E6PresetSetting the zoom servo start characteristics E7Setting the zoom servo stop characteristics E7Setting the analog demand curve characteristics E7CAM mode settings E8Setting the servo mode type from the zoom demand E8Focus control Focus demand curve characteristics E9TallySetting the tally lamp ON/OFF E6Tally lamp light quantity setting E11Indicator Setting the indicator ON/OFF E8CAFS Setting the CAFS ON/OFF E9ISIS mechanical lock setting E10IS operation switch setting E10IS mode setting E10OtherEncoder output setting E11Setting the camera serial communication to ON/OFF E11Adjusting the Camera Fol Voltage E12Reset operation Reset to default values E1