Preparation21ETurning off the tally lampsThe tally lamps let you know that the camera isrecording. However, the flashing of the front lampmay be reflected into the lens during close-uprecording, or when recording through glass.You may therefore decide to turn them off.TALLY LAMP••OFF1. Open either the camera menu or the VCR menu, and point the arrow at TALLY LAMP.2. Select the OFF setting and close the menu.• The tally lamps no longer flash during recording, but they will still light up when the camera receivesa signal from the wireless controller.SENSOR••••••OFFThe remote sensors can be turned off to prevent interference from other Canon wireless controllers beingused nearby.Turning off the remote sensors1. Open either the camera or the VCR menu, and point the arrow at SENSOR.2. Select the OFF setting and close the menu.• appears in the viewfinder.S OFF(see p. 18)(see p. 18)
