Windows13EInstalling the Digital Video Software❍ Before you connect the camcorder to the computer with the USB cablefor the first time, you must install one of the following drivers onto thecomputer.Windows 98/Windows 2000: TWAIN Driver ( 17)Windows Me: WIA Driver ( 18)❍ Users of Windows 2000 or Windows XP must first log in as anAdministrator to install programs.Windows XP Users:Your digital video camcorder is equipped with the standard PictureTransfer Protocol (PTP). This protocol enables you to download images bysimply connecting the camcorder to a computer with the USB cable (thesoftware such as the [Scanner and Camera Wizard] starts automatically).However, please note that there are several limitations to downloadingimages with this method. To avoid these problems, install ZoomBrowserEX to download images.❍ It may take a few minutes, after connecting the camcorder, until youcan download images.❍ Images protected on the camcorder may lose this setting once they aredownloaded to the computer.1. Close any programs that are running.2. Set the DIGITAL VIDEO SOLUTION DISK For Windows in thecomputer’s CD-ROM drive.• The installer panel opens automatically.• If the installer panel does not appear automatically, use the followingprocedures to display it.Windows 98, Windows Me, Windows 2000:1. Double-click the [My Computer] icon.2. Right-click the CD-ROM icon and select [Open] from the displayedmenu.3. Double-click the [Setup.exe] icon.Installing the Software
