Troubleshooting38TroubleshootingTroubleshootingTroubleshootingTroubleshootingLet’s take a look at countermeasures against the problem that may occur during use of theprinter.z “An Error Message is Displayed on the Operation Panel” on page 38z “Ink does not come out/ Printing is Blurred/ Colors are Wrong/ White Streaks” onpage 40z “Cannot Print Properly from the Digital Camera” on page 41z “An Error Message is Displayed While Using the Photo Viewer” on page 42An Error Message is Displayed on the Operation Panel An Error Number is Displayed.If an error number is displayed on the operation panel, take the corresponding countermeasuredescribed below.Note Here, we will discuss errors indicated on the operation panel, problems thatmight occur during direct printing from the digital camera, and problems thatare also likely to occur while using the Photo Viewer. If you cannot find thesymptom corresponding to a certain problem, refer to the User’s Guide.Error Number/Problem Try This102102102102The paper thickness lever position is wrong.Setting the paper thickness lever at the correct position will startprinting.Pressing the CancelCancelCancelCancel button will stop printing.202202202202The waste ink tank is almost full.Press the ResumeResumeResumeResume button to recover from the error.You can print images for a while but you cannot print any more imagewhen the waste ink tank becomes full. Contact the Customer CareCenter.301301301301There is no paper or paper cannot be fed.Load paper and press the ResumeResumeResumeResume button.Error number