FINE Cartridge Holder Does Not Move to the Position for ReplacingCheck1 Is the POWER lamp off?Check if the POWER lamp is lit.The FINE cartridge holder will not move unless the power is on. If the POWER lamp is off, close the cover andturn the printer on.While the POWER lamp is flashing, the printer is initializing. Wait until the POWER lamp stops flashing andremains lit, and then open the cover again.Check2 Is the Alarm lamp flashing?Close the cover, confirm the number of times the Alarm lamp is flashing, take the appropriate action to resolvethe error, and then reopen it. For details on how to resolve the error, see If an Error Occurs.Check3 Has the cover been left open for 10 minutes or longer?If the cover is left open for more than 10 minutes, the FINE cartridge holder moves to the position to protect it toprevent the print head from drying out. Close and reopen the cover to return the FINE cartridge holder to theposition for replacing.Check4 Has the printer been printing continuously for a long period?If the printer has been printing continuously for a long time, the FINE cartridge holder may not move to theposition for replacing since the print head may overheat.Note• Do not open the cover while printing is in progress; otherwise, an error occurs267Downloaded from ManualsPrinter.com Manuals
