Canon iP6210D - PIXMA Color Inkjet Printer Printing Manual

Also see for iP6210D - PIXMA Color Inkjet Printer: Supplementary guide Easy Setup instructions Quick start guide Service manual Quick start guide

Contents

Canon iP6210D - PIXMA Color Inkjet Printer Printing Manual Manual pdf 50 page image

46 POWER Lamp and Alarm Lamp Flash Alternately Ink Does Not Come Out/ Printing is Blurred/Colors are Wrong/WhiteStreaksAdjusting the Print Head ManuallyIf the automatic print head adjustment does not work or if you wish to adjustthe print heads manually, follow the procedure below.1. With the printer on, load a sheet of A4/Letter-sized plain paper in theauto sheet feeder.2. Press the ConfigurationConfigurationConfigurationConfiguration button repeatedly to select MAINTENANCEMAINTENANCEMAINTENANCEMAINTENANCE.3. Use the buttons to select ALIGN PRINT HEADALIGN PRINT HEADALIGN PRINT HEADALIGN PRINT HEAD and then press the OKOKOKOKbutton.Possible Cause Try ThisAn error that requirescontacting the Customer CareCenter may have occurredDisconnect the printer cable from the printer, and then turn the printer off and unplug the printerfrom the power supply. Plug the printer back in and turn the printer back on after leaving it for awhile.If the problem remains, contact the Customer Care Center.Possible Cause Try ThisA FINE Cartridge is not seatedproperly/FINE Cartridge isempty• Open the card slot cover first and the front cover next, and press up the FINE Cartridge toinstall it properly.• Ensure that the specified FINE Cartridge is installed. If the specified FINE Cartridge is not used,good printing color quality cannot be expected.See “Replacing a FINE Cartridge” on page 40.Incorrect media type On the operation panel, confirm that the media type selected matches the paper loaded.Print head nozzles clogged orshiftedPrint the nozzle check pattern to check for uneven ink output.When a specific color is missing from the nozzle check pattern, clean the print head.• If ink supply is uneven: See “Print Head Cleaning” on page 38.• If straight lines are shifted: See “Aligning the Print Head - Auto head align” on page 39.Media not loaded print-sideupCheck that your paper is loaded with the correct print side facing up.Follow the instructions packaged with your specialty media for loading and handling.4. Examine the printed pattern and enter thenumber of column “A” with fewest whitestripes using the buttons.5. Press the OKOKOKOK button.6. Repeat Steps (4) through (5) and enterthe pattern numbers up to column “N”.SET VALUEA 0