Canon iPF8000 series Service Manual

Also see for imagePROGRAF iPF8300: Brochure Troubleshooting guide Troubleshooting guide Brochure Setup guide

Contents

Chapter 77-97.1.3 Details of Service Mode 0025-0483This section provides details of the Service mode menu.a) DISPLAYDisplays and prints the printer information.1) PRINF INFPrints adjustment values in the User menu, [DISPLAY] and [COUNTER] parameters on A4-size or lager paper.When a roll media is used, the layout is optimized according to the media width.2) SYSTEMDisplays the printer information shown below.T-7-83) HEADDisplays the following EEPROM information of the printhead.T-7-94) INKDisplays the numbers of days passed since installation of the following ink tanks.T-7-105) WARNINGDisplays the warning history (up to 20 events). The newest event has the smallest history number.6) ERRORDisplays the error history (up to 20 events). The newest event has the smallest history number.7) JAMDisplays log of jams that have occurred (up to five events). The newest event has the smallest history number.Indicates the date and time of jam and error code. "0000" is displayed if there is no log.F-7-1Display Description UnitS/N Serial number of printer -TYPE Type setting on main controller PCB* iPF8300 are represented by 44".-LF TYPE Feed roller type: 0 or 1 -TMP Ambient temperature centigradedegreesRH Ambient humidity %SIZE LF Detected size of loaded media (feed direction)0 is always detected for the roll media.mm/inchSIZE CR Detected size of loaded media (carriage scan direction) mm/inchAFTERINST.Number of days since initial installation DaysDisplay DescriptionS/N R Serial number of printhead RS/N L Serial number of printhead LLOT R Lot number of printhead RLOT L Lot number of printhead LDisplay Description UnitBK Number of days passed since the BK ink tank was installed Day(s)MBK Number of days passed since the MBK ink tank was installed Day(s)C Number of days passed since the C ink tank was installed Day(s)M Number of days passed since the M ink tank was installed Day(s)Y Number of days passed since the Y ink tank was installed Day(s)PC Number of days passed since the PC ink tank was installed Day(s)PM Number of days passed since the PM ink tank was installed Day(s)GY Number of days passed since the GY ink tank was installed Day(s)PGY Number of days passed since the PGY ink tank was installed Day(s)R Number of days passed since the R ink tank was installed Day(s)G Number of days passed since the G ink tank was installed Day(s)B Number of days passed since the B ink tank was installed Day(s)X X X X - X X X X0 1 M M / D D H H : M M