Canon iR Security Kit-A1P Installation Manual

Also see for Color iR Security Kit-A1P: Service manual

– 2 –iR Security Kit – A1P/A1UInstallation ManualWhen installing the iR Security Kit - A1P/A1U, follow the instructions given in this manual.1 Package CheckOpen the package of iR Security Kit - A1P/A1U and check that the following items are enclosed:Fig. 1-1[1] Protect key device - Parallel (for A1P) ....... 1 pc.[2] Protect key device - USB (for A1U) ........... 1 pc.[3] iR Series Security System Setup ToolCD-ROM ..................................................... 1 pc.[4] User’s Guide ............................................... 1 pc.[5] Serial number label ..................................... 1 pc.About storing the protect key devices and CD-ROM after useInstruct the user to store the protect key devices and iR Series Security System Setup Tool CD-ROM securely because they are necessary for enabling the Security Option again when the optionis disabled by an operational error in Service mode or other. A protect key device is available onlyfor a copier where the device was used once. Once a protect key device has been damaged by staticelectricity or lost, the Security Option can no longer be set. To prevent this problem, instruct theuser to keep each protect key device in a conductive bag.About handling the protect key devicesTo protect the protect key devices from static electricity, note the following:• When install the devices, wear a ground wrist strap. If no grounding facility is available, connectthe ground terminal of the wrist strap to the frame of the copier.• Keep each protect key device in a conductive bag and take it out immediately before use.• Do not touch the connector terminals of a protect key device.