Canon iR2030 Series Service Manual

Also see for iR2018 Series: Service manual Brochure & specs Brochure & specs Easy operation guide Portable manual

Contents

Chapter 99-95) Disconnect the connector (J53) [1] on the power supply PCB.6) Remove the option power supply PCB [2].- Screw [3], 3 pcs.F-9-339.4.8 HVT PCB9.4.8.1 Removing the HVT PCB 0017-86741) Detach the rear cover.2) Detach the right cover (lower).3) Detach the delivery tray.4) Remove the power supply PCB.5) Remove the HVT PCB.- Connector [2], 1 pc.- Screw [3], 2 pcs.F-9-349.4.9 Fixing Heat Discharge Fan9.4.9.1 Removing the Fixing Heat Discharge Fan (NonDuplex Unit Type) 0017-88261) Open the left door until it stops.2) Remove the transfer/registration unit [1].- Screw [2], 4 pcs.F-9-353) Disconnect the connector [1], and then release the harness from the wiresaddle [2].F-9-364) Remove the duct [1].- Screw [2], 2 pcs.F-9-37When installing the HVT PCB, check that the contacts on the high voltageelectrode plate [1] touch the contacts on the PCB.[3][1][3][3] [2][3][2][1][1][2] [2][1][2][1][1][2]