CHAPTER 5 SERVICE MODE5-69Use it to execute fixing assembly-related automatic adjustments.NIP-CHKUse it to obtain output for automatic measurement of the fixing nip width.Using the Mode1) Make a solid black print in A4/LTR.2) Make about 20 A4/LTR prints of the Test Sheet.3) Place the A4/LTR solid black output obtained in step 1. in the manualfeed tray with the printed side facing down.4) Select , and press the OK key.• After pickup, the paper will stop between the fixing rollers and then de-livered in about 20 sec.5) Measure the width indicated in the diagram.F05-501-07Caution a and b are points 10 mm from both ends of the paper.Paper feeddirectionStandarda - c = 0.5 mm or lessStandard:5.5 ± 0.3 mmcab Middleof paperCOPIER>FUNCTION>FIXING
