Chapter 1414-7This copier is furnished with a counter, which can be used to gain rough measures of when to replace supplies. The counter set increments by one on counting eachsheet of small-sized paper (up to A4/LTR) and by two on counting each sheet of large-sized paper (larger than A4/LTR).14.6 Display14.6.1 Version Display 0022-5242The table below lists the items of ROM display mode that are supported.14.6.2 Error Code Display 0022-5243Indicate the error code on the operation panel.14.7 Report14.7.1 Outline 0022-5244The table below lists the kinds of reports that are supported.Item Counter ExplanationTotal Counter TTL Total counterCOPY Total copy counterPDL-PRT PDL print counterREP-PRT Report print counter2-SIDE Double-sided copy/print counterSCAN Scan counterPick-up Counter C1 Cassette 1 jam counterC2 Cassette 2 jam counterC3 Cassette 3 jam counterC4 Cassette 4 jam counterMF Manual feed tray pickup total counterFeeder Counter FEED Feeder pickup total counterDFOP-CNT ADF open/close hinge counterJam Counter TTL Unit total jam countFEEDER Feeder total jam countSORTER Finisher total jam count2-SIDE Duplex unit jam counterMF Manual feed tray jam counterC1 Cassette 1 jam counterC2 Cassette 2 jam counterC3 Cassette 3 jam counterC4 Cassette 4 jam counterMISC counter WST-TNR Waste toner counterTR-ROLL Transfer roller counterDV-UNIT-C Developing unit counterM-PU-RL Manual feed pickup rollercounterM-SP-PD Manual feed separation pad counterFX-UNIT Fixing unit counterItem ExplanationMAIN Displays the version number of the ROM (SYSTEM) mounted on the imageprocessor PCB.MAIN2 Displays the version of the ROM (BOOT) mounted on the image processorPCB.ECONT Displays the version number of the ROM mounted on the DC controller PCB.Tray2 Not used.Tray3 Not used.Tray4 Not used.Duplex Not used.Finisher Displays the version number of the ROM mounted on the finisher controllerPCB.
