Canon iR3300 Copying Manual

Also see for iR2200 Series: Function guide Service manual Printer guide Service handbook Service manual

Contents

Erasing Shadows and Frame Lines from Copies (Frame Erase)2-322-322-322-322222The position of the binding holes refers not to the position in which the original is placed on the platenglass, but to the position of the binding holes viewed when the surface of the original that you want toscan is face up, with its top edge aligned with the top left corner of the platen glass.4444 Set the desired binding erase width using [–] or [+], and press [OK]Set the desired binding erase width using [–] or [+], and press [OK]Set the desired binding erase width using [–] or [+], and press [OK]Set the desired binding erase width using [–] or [+], and press [OK] → press [Done].press [Done].press [Done].press [Done].When entering values in millimetres, you can use - (numeric keys) and .Even when you enter the values with - (numeric keys), you can change the values using [–] or [+].The specified mode is set and the display returns to the Basic Features screen.If you enter a value outside the setting range, a message prompting you to enter an appropriate valueappears in the screen.NOTE••••If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the Additional Functionsbeforehand. (See the Reference Guide.)••••The default setting is 18mm.5555 Press .Press .Press .Press .Copying starts.NOTE••••To cancel the setting, press [Special Features] →[Frame Erase] →[Cancel], in this order.••••To cancel all settings and return the machine to the Standard mode, press .