MF Toolbox Settings3-10Scanning3■ [Scan Mode]Selects the scan mode. The scan modes you can select differ depending on the MFToolbox button you press.■ [Image Quality]Selects the scan quality (resolution).When scanning using the [Mail] button, the resolution you can select will depend on yoursetting in [Upper Limit of Attached File].■ [Paper Size]Selects the size of the document you will scan.If you wish to specify the width and height with a value, select [Custom] to display the[Paper Size Settings] dialog box. Select the [Unit], enter the [Width] and [Height] ➞ click[OK].■ [Upper Limit of Attached File]Selects an approximate upper size limit (after compression) for the image you will send.(Depending on the image, some file sizes after compression may be larger than the valueset.)For an ordinary mail message, a file size of [150 KB] is recommended.You cannot select this item when [PDF] is selected in [Save as Type].■ [Use the Scanner Driver to Make Advanced Settings]If you check this checkbox and click [Start], the ScanGear MF dialog box will appear andyou can make advanced settings for scanning.If you do not check this checkbox, scanning will begin immediately with the settingsdisplayed.This option is not available when scanning using the [OCR] button.[Black and White] Scans document as a black and white image.[Grayscale] Scans document as a grayscale image (similar to a monochromepicture).[Color] Scans document as a color image.[Color (Magazine)] Scans document as a color image with the [Descreen] function set to[On]. The [Descreen] function is designed to reduce as much aspossible the distorted pattern (moire) which occasionally occurswhen scanning printed materials. The scanning of a document willtake longer if you use this function.
