| 
Troubleshooting11-24Error Code Description Action#0403 The same file name exists when youare scanning a document to a USBmemory.Press [OK] and rename the file.#0406 Some kind of error has occurred inthe machine when you are scanninga document to a USB memory (e.g.,the USB memory is disconnectedfrom the machine, or file system is notsupported.).Make sure that the USB memory isinserted correctly to the machine, orfile system is supported.Press [OK] and try again.#0703 The memory for image data is fullwhen sending documents.Wait a few moments, and then trysending again after other send jobsare complete.Erase documents stored inmemory. If the machine still doesnot operate normally, turn themain power OFF, and then backON.––#0705 The send operation was interruptedbecause the size of the image datais larger than that specified in TX DATA SIZE> in in in SETTINGS>.Change the setting for DATA SIZE> in in in SETTINGS>.Select a lower resolution.Set to in send settings.–––#0752 Some kind of error occurred in themachine when sending a colore-mail.– Try sending again before checkingthe network conditions or settings.–The SMTP server name or POPserver name for e-mail is notcorrect, or the server is notfunctioning.– Check the SMTP server name,domain name, POP server name,and e-mail address in I-FAX> in in.–The domain name or e-mailaddress may not be set.– Check that the SMTP server isoperating properly.–The network is down.– Check the network status.– |
