Canon imageCLASS MF6595 Starter Manual

Also see for imageCLASS MF6540: Basic guide Starter Guide Advanced guide Software guide Basic operation guide

20The LCD display turned off:The machine may enter the sleep mode while you aresetting up the machine. Press [POWER] to turn themachine back on and continue the setup.1 Press [Additional Functions].2 Press [ ] or [ ] to select <9. SYSTEMSETTINGS>, then press [OK].3 Press [ ] or [ ] to select <2. NETWORKSETTINGS>, then press [OK].4 Press [ ] or [ ] to select <5. VIEW IPADDRESS>, then press [OK].●5 Press [ ] or [ ] to select <1. IP ADDRESS>,<2. SUBNET MASK>, or <3. GATEWAYADDRESS>, then press [OK].If the machine is communicated with the networkproperly, the IP address, subnet mask and gateway addressare displayed.If not, IP address, subnet mask and gateway address arenot displayed.If the machine does not get the IP address 30 seconds afteryou connect the LAN cable, turn off the main power switchonce, and then turn it on again and wait for another 90seconds. If the machine still does not get the IP address,ask your network administrator.We recommend you to take a note of the IP address youconfirmed here, because you need it for Chapter 7, “Usingthe Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only),”in the Reference Guide.6 Press [Stop] to return to the standby mode.Software Settings with ComputerThis is the setting for the Static IP. If the machine gets IP address automatically in “Automatic Setting”, skipthis setting.In this setting, you enter the IP address, subnet mask, and gateway address manually. [AdditionalFunctions] → <9. SYSTEM SETTINGS> → <2. NETWORK SETTINGS> → <1. TCP/IP SETTINGS> → <1. IPADDRESS AUTO.> → → <2. IP ADDRESS> → Enter the IP address → <3. SUBNET MASK> → Enter thesubnet mask → <4. GATEWAY ADDRESS> → Enter the gateway address number → Press [Stop] → Turn offthe main power → Restart the machine. For details on this setting, see Chapter 6, “Network (MF6595cx/MF6595/MF6590/MF6540 Only),” in the Reference Guide. Once you complete the setting, please proceedto “Checking the IP Address Setting,” on p. 19.Manual Setting