Canon imageClass MF5770 Setup Sheet

Also see for imageCLASS MF5770: Facsimile guide Basic guide User manual Basic guide Remote ui guide

Set-Up SheetThank you for purchasing the Canon imageCLASS MF5770.Follow the instructions in this document first to set up the machine.1 Unpack machineNOTE• Items can vary depending on the country of purchase.1. Carefully remove the machine from the box andplace it on a flat surface.2. Remove all shipping tape from the machine.Referring to the following figure, remove the tape and spacerson both sides of the cassette housed in the machine.3. Hold the document feeder (A) with one hand, and open thedocument feeder tray (B) with the other.4. Check that you have these items:• Cartridge (C)• Cassette extension (D)• Extension cover (E)• Power cord• USB cable• Telephone cable• Destination labels• Quick Reference Guide• Facsimile Guide• User Software CD-ROMBACDE2 Install paper cassette1. Pull out the paper cassette.2. Attach the cassette extension to the cassette.3. Insert the cassette back into the machine.IMPORTANT• Do not push in the cassette at an angle. Doing so maydamage the paper sensing lever inside the machine.4. Attach the extension cover on the back of the machine.3 Connect telephone cable1. Connect the telephone line to (LINE). Connect the otherend to the wall jack (A).2. Optional: Connect a telephone (B) or an answeringmachine to (EXT.).AB4 Install cartridge1. Remove the cartridge from the bag. Keep the bag forfuture use.2. Rock the cartridge several times to distribute tonerevenly.3. Hold the cartridge. Break the tab (A) and pull out theseal (B) completely.4. Open the front cover.5. Hold the cartridge with instructions (C) face up andarrow (D) pointing to the machine. Insert the cartridgeas far as it will go.6. Close the front cover completely.BACD5 Load paperNOTE• If the cassette is not fully inserted into the machine, paper jams may occur.• Make sure the correct paper size is specified in the <1.PAPER SETTINGS> menu. See “3.1 SetPaper Size” in the Quick Reference Guide.1. Pull out the paper cassette from the machine.2. Adjust the rear paper end guide to match the papersize.3. Load paper into the cassette. Make sure the paperstack sits below the hooks (A).4. Adjust the side paper end guides to match the papersize.NOTE• If the rear and side paper end guides are not properlyadjusted to the paper size, the machine may not deliverprintouts.5. Even out the edges of the paper stack. Make sure theheight of the paper stack does not exceed the limitmarks (B).6. Insert the paper cassette into the machine as far as itwill go.AB6 Connect power cordIMPORTANT• Do not load paper from the back of the machine.Doing so may damage the paper feeding assembly insidethe machine.1. Connect the power cord into the rear socket and the wall outlet.2. If the message appears, pressor a to select the desired language for the LCD.Press [OK] b.IMPORTANT• For important safety instructions on installation and handling of the machine, see “Safety Instructions”in the Quick Reference Guide.OK7 Install softwareTo Use the Machine as a Local Printer(USB Connection)NOTE• To use the machine as a network printer, see the reverse side.IMPORTANT• Do not connect the USB cable before installing the software. If you connect the USB cable beforeinstalling the software and the Found New Hardware Wizard screen appears, click [Cancel] anddisconnect the USB cable.NOTE• For Windows 2000/XP, log on as Administrator to install the software.STEP 1 Install MF Drivers:1. Turn on your computer.2. Quit any open applications, including virus checkingsoftware.3. Insert the User Software CD into the CD-ROMdrive.4. When the MF Setup screen appears, click [InstallDrivers] (A).• If the MF Setup screen is not displayed, on theWindows desktop, click My Computer. Open theCD-ROM icon, then double-click setup (setup.exe).5. Click [Install MF Drivers] (B) on the Install Driversscreen.1. When the MF Drivers-Setup Wizard screenappears, follow the instructions on the screen.2. When the installation is complete, click [Exit] (D) toclose the MF Drivers-Setup Wizard screen.AEFBDSTEP 2 Install MF Toolbox:NOTE• To install accompanying applications, click [Install Applications] (E) on the MF5700 Series Setupscreen.• To read manuals in the User Software CD, click [Read Manuals] (F) on the MF5700 Series Setupscreen.8 Connect USB cableYou have now completed machine setup.Turn over to continue1. On the Install Drivers screen, click [Install MFToolbox] (C).2. When the MF Toolbox Setup screen appears, followthe instructions on the screen.3. When the installation is complete, click [Exit] (G) toclose the MF Toolbox Setup screen.NOTE• Use of a cable 3 m long or less is recommended.1. Make sure the machine’s power is turned on, andconnect the cable to the USB port on the back of themachine. Then connect the other end of the cable tothe USB port on your computer.2. Click [Exit] to close the MF Setup screen. Removethe User Software CD from the CD-ROM drive andstore it in a safe place.CG

/ 2

Related manuals for Canon imageCLASS MF5770