Canon imageFORMULA DR-M140 Reference Manual

Also see for imageFORMULA DR-M140: Brochure & specs Brochure & specs Pocket guide User manual User manual

363 Click the Start button.The document is scanned. While scanning is in progress, thenumber of pages scanned is displayed in addition to the scannersettings.When all the pages of the document are scanned, the scannedimages are output according to the registered job settings and thecomplete screen appears.IMPORTANTIf you configure scanning conditions that consume a large amount ofthe computer's memory, scanning may stop because of insufficientmemory. If an error message appears due to insufficient memorywhile scanning is in progress, exit the application, change thescanning conditions, and then try scanning again.Hint• Clicking [Return to top] returns to the top screen of Select Scan Job.• When output methods apart from [Attach to E-mail] or [Print] arespecified, you can click [Open storage folder] to open the folder inwhich the scanned images were saved.When [Enable continuous scanning] is set to [ON]The Continuous Scanning screen (see p. 39) appears when all thepages of the document are scanned.If you want to scan another document, place the document in thescanner and then click [Scan].When scanning of all the documents is finished, click [Next step].When [Check output after scanning] is set to [ON]The Output Confirmation screen appears before the scanned imagesare output.Change the settings for the output method if necessary and then clickthe output button. The name of the output button differs for eachselected output method.0-00-DR-M140_RG_UK.book Page 36 Monday, August 8, 2011 5:15 PM