Canon imageFORMULA DR-X10C Easy Start Manual

Also see for DR-X10C - imageFORMULA - Document Scanner: Brochure & specs Brochure & specs Pocket guide User manual Pocket guide

☞ Continued on back sidePUB. CE-IE-586 © CANON ELECTRONICS INC. 2007Easy Start GuideDocument Scanner DR-X10CENGLISHThank you for purchasing the Canon imageFORMULA DR-X10C Document Scanner.Manuals for the ScannerThe documentation for the scanner consists of theEasy Start Guide (this manual) and theReference Guide (supplied with the scanner), theUser Manual, and theCapturePerfect3.0Operation Guide, which are provided in electronic form and registered in the menu duringsoftware installation.Please read this and the following manuals thoroughly before using the scanner to becomeacquainted with its capabilities and make the most of its many functions.After reading the manuals, store them in a safe place for future reference.■ Trademarks• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also betrademarks or registered trademarks in other countries.• Microsoft Windows® is a registered trademark of Microsoft USA in the United States and other countries.• Other brands and product names used in this manual may be trademarks or registered trademarks of theirrespective companies.Checking the Package ContentsWhen you unpack your scanner, make sure all of the following accessories are included.If any of the items listed below are missing or damaged, contact your local authorized Canondealer or service representative.Installing the RollersInstall the supplied pickup roller and feed roller in the scanner.● The pickup roller and feed roller are installed in the following locations afteropening the upper unit.● Be sure to install the pickup roller and feed roller, as documents will not feed if therollers are not installed.1. Press the Open/Close button, and carefully raise the upper unit until it stops.2. Hold the roller cover as shown, and lower it toward you.Do not hold the glass portion when opening and closing the roller cover.3. Set the pickup roller (11111) in place, and push the mounting lever (22222) back tosecure it.4. Push the lock lever for the feed roller down (11111) and to the right (22222).5. Align the notches in the shaft of the feed roller with the pins on the shaft in thescanner, and place the feed roller into position.Feed Roller❏ The scanner weights about 39 kg.To lift or move the scanner, always use two people, one on each side. Neverattempt to lift the scanner by yourself. You could drop the scanner or pinch yourfingers, resulting in personal injury or damage to the scanner. Remember to beextra careful when moving it.IMPORTANTCAUTIONInstalling the SoftwareInstall the software before connecting the scanner to the computer.1. Log on to Windows with Administrator privileges.2. Insert the DR-X10C Setup Disc into thecomputer’s CD-ROM drive.The setup menu automatically starts upwhen you insert the CD-ROM into the CD-ROM drive. If the setup menu does not startup, run the setup.exe application on theCD-ROM.When Installing in Windows VistaWhen using Windows Vista, the “UserAccount Control” dialog box may appear. Inthis case, enter your login user passwordfor Administrator privileges, and click [OK].3. The setup menu starts up.The setup menu consists of the following screens:4. Click [Typical Installation].[Typical Installation] installs the software(scanner driver, CapturePerfect 3.0) and theUser Manual. The CapturePerfect 3.0Operation Guide is installed on thecomputer during the CapturePerfect 3.0installation.5. Click [Install].The scanner driver installation wizardappears. This operation installs both thescanner driver and the Job Tool.6. Click [Next].7. Read the software license agreement, andclick [Yes] if you consent to its conditions.Installation of the scanner driver starts.8. Click [Finish] to complete the installation.Next, the installation wizard forCapturePerfect 3.0 appears.9. Click [Next].6. Push the lock lever for the feed roller to the left (11111) and up (22222) to lock the feedroller in place.7. Push the roller cover up until it clicks into place.8. Carefully lower the upper unit (11111). Press down on both sides of the upper unit toensure that it is securely closed (22222).IMPORTANT● The cleaning cloth is used for cleaning the scanner’s interior.● The roller cleaning sheets are adhesive sheets (with peel-off protective sheets)used for removing dust and particles from the transport rollers. Use them when youenable the scanner’s Cleaning Mode. (Do not remove the protective sheets untilyou are ready to use the sheets.)● Items included in this package are subject to change without notice.● Keep the package and packing materials for storing or transporting the scanner.● A print version ofReference Guide is supplied in English. PDF files of theReference Guide in other languages can be found on the Setup Disc CD-ROM.● Use the supplied clear binder to store manuals printed from the Setup Disc.The electronic manuals are PDF (Portable Document Format) files, and are installedin the following folders during software installation. (☞ STEP 2)User Manual CapturePerfect 3.0 Operation GuideIMPORTANTEasy Start Guide (This Manual)This manual describes the procedures for setting up the scanner for use.Please follow the procedures in theEasy Start Guide to set up the scanner.Reference GuideThis manual consists of the basic scanner operating instructions extractedfrom theUser Manual. For more details, refer to theUser Manual.User Manual (Electronic Manual)This manual consists of two sections: Hardware and Software.The Hardware section provides general information about the scanneroperational settings, maintenance, and troubleshooting.The Software section describes how to use the ISIS/ TWAIN driver with thescanner, and how to set up job registration tools.CapturePerfect 3.0 Operation Guide (Electronic Manual)This is the operation guide for CapturePerfect 3.0, the Canon documentscanner application program.After checking the package contents, you need to install the suppliedpickup roller and feed roller. (☞ STEP 2)Pickup RollerOpen/Close Button❏ Before installing the software, make sure your computer is correctly running one ofthe following versions of Windows. For details on system requirements, refer to“Installation Requirements” on p. 2-3 of the User Manual.• Windows 2000 Professional SP4 or later• Windows XP Home Edition SP2 or later• Windows XP Professional SP2 or later• Windows XP Professional x64 Edition• Windows Vista Home Basic (32- and 64-bit versions)• Windows Vista Home Premium (32- and 64-bit versions)• Windows Vista Business (32- and 64-bit versions)• Windows Vista Ultimate (32- and 64-bit versions)• Windows Vista Enterprise (32- and 64-bit versions)❏ Do not connect the scanner to the computer before installing the software. If youconnect the scanner and turn it ON before you install the software, a wizard screenwill appear. If this wizard appears, click [Cancel] to exit the wizard, and then turnthe scanner OFF.Windows 2000Windows XPWindows Vista❏ Close all other applications before installing the software.CAUTIONTypical InstallationMenu Screen* Installs all of the software displayed.Read Manuals* The User Manual and CapturePerfect 3.0Operation Guide electronic manuals forthe scanner are installed on the computerwith the rest of the software.Custom Installation* Installs only the selected software.Easy Start GuideDocument Scanner DR-X10CENGLISHDR-X10CPower Cord(Length: 1.5 m)USB Cable(Length: 2 m)Pickup Roller Feed RollerEasy Start Guide(This Guide)Reference GuideDR-X10CSetup DiscRoller CleaningSheets (4)Cleaning Cloth (1) Clear Binder (1)After installing the rollers, you need to install the software.(☞ STEP 3)Avant l’utilisationVor dem GebrauchAntes de la utilizaciónPrima dell’usoVoor gebruikBefore Use Software licenseagreement

/ 2

Related manuals for Canon DR-X10C - imageFORMULA - Document Scanner