Printing at full sizeBorderless Printing at Actual SizeTake advantage of borderless printing to print documents such as posters (made up mainly of photos orimages) without a surrounding margin, or border.Borderless PrintingIn regular printing, a margin required by the printer is added around the original. With borderless printing, youcan print documents without the margin, so that the printed image covers the entire surface of the paper.Important• Borderless printing is only available with rolls.• Paper you can use for borderless printing is restricted to particular types of paper and rolls of particularwidths. For information on types of paper compatible with borderless printing, refer to the PaperReference Guide. (→P.104)• If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printingon the Roll Holder. (→P.140)If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.• Paper incompatible with the printer’s auto cut function can be printed without borders on the left andright sides only.• These features cannot be used in combination with borderless printing: special page layouts, centeringoriginals, and printing cut lines on rolls.• You cannot have pages rotated 90 degrees to conserve paper if you have set up borderless printing atactual size or in combination with resizing originals to match the paper size.• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may beuneven at the edges. If you require higher image quality, specify No in Auto Cut in the printer driver. Inthis case, the paper can be printed without borders on the left and right sides only. After ejecting andcutting the printed document, use scissors to cut away the top and bottom edges.• By factory default, the ink drying time is disabled for all paper. When you are using paper that takeslonger for ink to adhere for borderless printing and the Cutter Unit touches printing surfaces that are notdry yet, it may damage the paper or the edge of the document that is cut, depending on frequency ofuse. In this case, follow these steps to change the ink drying time.1. On the Main sheet of the printer driver, click Settings in Media Type.2. Select the ink drying time in the Between Pages list of Drying Time.Borderless Printing MethodChoose the method of borderless printing that suits the original, as desired.Enhanced Printing Options 259Downloaded from ManualsPrinter.com Manuals
