12PartsTo recover from Sleep mode, any button can be pressed except the Power button.•Control PanelIndicates the status of print jobs or the printer firmware.Lit or flashes when messages are displayed. When the lamp is off, the printer isoperating normally or turned off.Lit when rolls are selected as the paper source.Lit when Tray or Front Paper Feed Slot is selected as the paper source.Press this button when loading or replacing paper.(→ , Loading Rolls in the Printer), (→ , Loading Sheets in the Printer)Pressing this button when rolls are loaded enables you to reposition the paper.Pressing this button when rolls are loaded cuts the paper.Data Lamp (green)Message lamp (orange)Roll Media lamp (green)Cut Sheet lamp (green)Load buttonFeed buttonCut buttonMenu buttonBack button◄ buttonOK button▼ button▲ button► buttonNavigate buttonDisplay ScreenStop buttonPower button (green)NamejlmnopqkihgfedacbrDisplays the screen before the current screen.Displays the Tab Selection screen. (→ , Menu Map)Press this button on the Tab Selection screen to move to another tab. In menu itemsrequiring numerical input, press this button to move to another digit.Press this button on the Tab Selection screen to display the menu of the tab shown.Press this button when viewing menus to display the next menu item or setting value.Press this button when viewing menus to display the previous menu item or settingvalue.Press this button on the Tab Selection screen to move to another tab. In menu itemsrequiring numerical input, press this button to move to another digit.Shows the printer menu, as well as the printer status and messages.Turns the printer on and off. The power button is lit when the printer is on or in Sleepmode.Cancels print jobs in progress and ends the ink drying period.Enables you to check instructions for loading and removing paper or replacing ink tanksor printheads, as well as other operations.OperationPressing this button in menu items of each tab for which is displayed at left will moveto the lower level of the menu item, enabling you to execute menu commands or setmenu values.Also press this button if the Display Screen indicates to press the OK button.bcdghijknomaeflpqr