• C Enlarged/Reduced PrintingChoose from the following options when this setting is activated.• Resizing Originals to Match the Paper Size ➔P.58• Resizing Originals to Fit the Roll Width ➔P.60• Resizing Originals by Entering a Scaling Value ➔P.63• D Fit Paper SizeScales the document image to match the paper size.• E Fit Roll Paper WidthScales the document image to match the roll width.• F ScalingResizes the document image based on a specified scaling value. Enter a value in a range of 5–600.• G Paper SizeChoose the size of the paper you will print on.For details on available paper sizes, see "Paper Sizes." ➔P.310• H OrientationChoose the printing orientation.• Making the Original Orientation Match the Paper Orientation ➔P.131• K Rotate Page 90 degrees (Conserve Paper)Activate this setting to rotate the document image by 90 degrees before printing.• Conserving Roll Paper by Rotating Originals 90 Degrees ➔P.121• L Paper SourceChoose the feed source, as desired.Options displayed in the list vary depending on the selection in Media Type on the Main sheet.• M Roll Paper WidthChoose the roll width.For details on available roll widths, see "Paper Sizes." ➔P.310• N Roll Paper OptionsComplete optional roll paper settings. Click to display the Roll Paper Options dialog box.Under A Automatic Cutting, you can specify Yes or No and Print Cut Guideline.• Cutting Roll Paper After Printing ➔P.135Select B Banner Printing when printing multiple pages continuously.• Printing Multiple Pages Continuously ➔P.102Page Setup Sheet iPF770User's GuideWindows Software Printer Driver160
