Canon imagePROGRAF iPF815 Basic Manual

Also see for imagePROGRAF iPF815: Technical documents Brochure Basic guide Basic guide Setup guide

9PartsStandRoll HolderEjection SupportStationary Output StackerPaper Feed SlotHolder StopperInk Tank CoverControl PanelRoll Holder SlotEjection GuideRelease LeverMaintenance CartridgeCarrying HandlesMaintenance CartridgeCoverTop CoveriPF815Stand LStand RTop Stand StayStopperLeg CoversThe left leg of the Stand.A stand that holds the printer. Equipped with casters to facilitate moving it.Absorbs ink used for maintenance purposes such as head cleaning. (Replace thecartridge when it is full.)Open this cover to replace the Maintenance Cartridge.When carrying the printer, have six people hold it by these handles under both sides.Guides printed documents as they are ejected. Open this guide when loading a roll.A cloth tray that catches ejected documents.Prevents printed documents from winding around the Roll Holder or being drawn intothe Paper Feed Slot.Load the roll on this holder.When loading a roll, insert the edge of the roll paper here.Secure rolls on the Roll Holder with this part.Open this cover to replace an Ink Tank.Use this panel to operate the printer and check the printer status.Slide the Roll Holder into this slot.Releases the Paper Retainer. Lift this lever toward the front of the printer when loadingpaper.Open this cover to install the Printhead, load paper, and remove any jammed paper frominside the printer as needed.The right leg of the Stand.Supports Stand L and Stand R. Attach the optional Media Take-up Unit to this part.Locks the Stand casters.Covers for Stand L and Stand R.Always release the Stopper before moving the printer. Moving the printer while theStopper is locked may scratch the casters or the floor.OperationNamedeghijcbklmnopafqrtsajikbcdmfpghrlmsnqoset