c. Data lamp (Green)• FlashingDuring printing, the Data lamp flashes when the printer is receiving or processing print jobs. Otherwise, this lampflashes when the print job is paused or the printer is updating the firmware.• OffThere are no active print jobs when the Data lamp is off.d. Message lamp (Orange)• OnA warning message is displayed.• FlashingAn error message is displayed.• OffThe printer is off or is operating normally.e. Paper Source SectionAfter you press the Feeder Selection button, the lamp for your chosen paper source is lit.1. Roll Media lamp (Green)• OnIndicates that a roll is selected as the paper source.• OffIndicates that a sheet is selected as the paper source.2. Cut Sheet lamp (Green)• OnIndicates that a sheet is selected as the paper source.• OffIndicates that a roll is selected as the paper source.f. Feeder Selection ButtonSwitches the paper source. Each time you press this button, the paper source switches between the roll and the sheet,and the corresponding lamp on the Paper Source Section is lit.g. Display ScreenShows the printer menu, as well as the printer status and messages.h. Color LabelThis label indicates the Ink Tank color. The label corresponds to the ink level on the Display Screen.i. HDD lamp (Green)• OnIndicates the printer is accessing the hard disk.• OffIndicates the printer is not accessing the hard disk.j. ◀ ButtonMenu mode: Press this button to display the menu one level higher.Printer Parts > Control Panel >iPF815 Control Panel9693
