Canon imagePROGRAF iPF8300 Basic Guide No.1 Basic Manual

Also see for imagePROGRAF iPF8300: Brochure Troubleshooting guide Troubleshooting guide Brochure Setup guide

Contents

13Attaching the Roll Holder to Rolls234With the edge of the roll paper facing forward as shown,insert the Roll Holder from the right of the roll. Insertit firmly until the roll touches the flange (a) of the RollHolder, leaving no gap.Insert the Holder Stopper from the left in the Roll Holderas shown. Holding it at the position shown (b), push itfirmly in until the flange (a) of the Holder Stopper touchesthe roll. Lock the Holder Stopper lever (c) by pushing itdown toward the shaft side.Insert the respective attachments for the roll paper coreon the Roll Holder and Holder Stopper.Using rolls with a 2-inch paper core•Holder Stopper Side Roll Holder SideHolder Stopper Side Roll Holder SideAlign the tips (a) of the 2-Inch Paper CoreAttachment with the holes (b) of the Holder Stopperand insert it firmly.No attachment is needed.Using rolls with a 3-inch paper core•Align the tips (a) of 3-Inch Paper Core Attachment#2 with the holes (b) of the Holder Stopper andinsert it firmly.Align the tips (a) of 3-Inch Paper Core Attachment#1 with the holes (b) of the Roll Holder and insert itfirmly.ac baababab