Canon imageRUNNER 2206 User Manual

Also see for imageRUNNER 2206: Getting started Getting started

Entering Sleep Mode3EEJ-00RThe sleep mode function reduces the amount of power consumed by the machine by disabling power flow to thecontrol panel. If no operations will be performed on the machine for a while, such as during a lunch break, you cansave power simply by pressing on the control panel. You can also use the Auto Sleep Time setting toautomatically put the machine into sleep mode if it remains idle for a specified length of time.NOTEWhen in sleep modeWhen the machine enters sleep mode, lights up yellow green.Situations in which the machine does not enter sleep mode● When the machine is in operation● When the [Processing/Data] indicator is lit up or blinking● When the machine is performing an operation such as adjustment or cleaning● When a paper jam occurs● When the menu screen is displayed● When a job is waiting to be scanned to a computer● When an error message is displayed on the screen (There are some exceptions. The machine sometimesenters sleep mode when error messages are displayed.)When You Want to Set the Auto Sleep TimerThe factory default settings for the amount of time that elapses before the machine enters auto sleep mode arelisted below. We recommend using the factory default settings to save the most power. If you want to changethe amount of time that elapses before the machine enters auto sleep mode, follow the procedure below.● 10 minutes (setting range is 3 to 60 minutes) Set the amount of time that elapses before themachine automatically enters sleep mode Basic Operations39