xxiiiCAUTION• Do not install the machine in unstable locations, such as unsteady platforms orinclined floors, or in locations subject to excessive vibrations, as this may cause themachine to fall or tip over, resulting in personal injury.• Never block the ventilation slots and louvers on the machine. These openings areprovided for proper ventilation of working parts inside the machine. Blocking theseopenings can cause the machine to overheat. Never place the machine on a softsurface, such as a sofa or rug.• Do not install the machine in the following locations:- A damp or dusty location- A location near water faucets or water- A location exposed to direct sunlight- A location subject to high temperatures- A location near open flamesPower SupplyWARNING• Do not damage or modify the power cord. Also, do not place heavy objects on thepower cord, or pull on or excessively bend it, as this could cause electrical damageand result in a fire or electrical shock.• Keep the power cord away from a heat source; failure to do this may cause the powercord coating to melt, resulting in a fire or electrical shock.• Do not connect or disconnect the power cord with wet hands, as this may result inelectrical shock.• Do not connect the power cord to a multiplug power strip, as this may cause a fire orelectrical shock.• Do not bundle up or tie the power cord in a knot, as this may result in a fire orelectrical shock.• Insert the power plug completely into the power outlet, as failure to do so may resultin a fire or electrical shock.• Do not use power cords other than the power cord provided, as this may result in afire or electrical shock.• As a general rule, do not use extension cords. Using an extension cord may result ina fire or electrical shock. If an extension cord must be used, however, use one ratedfor voltages of 220 - 240 V AC and over, untie the cord binding, and insert the powerplug completely into the extension cord outlet to ensure a firm connection betweenthe power cord and the extension cord.
