Parts and Their Functions1-12Before You Start Using This Machine1Control Panela keyPress to switch the machine to the Copy mode.b keyPress to enable the Network Scan function. (Seethe Network ScanGear Guide.)c LCD displayDisplays messages, prompts, text, settings,numbers, and graphics when operating themachine.d (Tone) keyPress to change the entry mode when you wantto enter characters and/or numbers on the LCDdisplay.e Numeric keysUse to enter alphanumeric characters.f Control Panel Power Switch(Sub Power Supply)Press to turn the control panel ON or OFF. Whenthe control panel is turned OFF, the machine is inthe Sleep mode.g (Additional Functions) keyPress to access the Additional Functions menu.h (Stop) keyPress to stop copying or scanning.i (Start) keyPress to start an operation.j (Clear) keyPress to clear entered values or characters.k (ID) keyPress to log in to/out of the machine when themachine is managed with Department IDs/User IDs.l (Reset) keyPress to cancel all settings and return to theStandby display.m (View Settings) keyPress to confirm your settings.n , , and keysUse [ ], [ ], [ ], or [ ] to move the cursorposition or decrease or increase values.o (Back) keyPress to go back to the previous items in themenu.p (System Monitor) keyPress to check the status of the machine,including copy and print jobs.
