PCL/PS Settings2-322Printer Settings MenuPS Job Timeout0 to 3600 seconds; 0* secondsThis setting enables you to specify the amount of time before a job times out. If ajob has not finished within the set time limit, the job automatically cancels. Wait Timeout0 to 3600 seconds; 300* secondsThis setting enables you to specify the amount of time the machine will wait fordata sent from the host computer before it times out. If data is not received withinthe set time limit, the job automatically cancels. Print PS ErrorsOn, Off*This setting determines whether an error page is printed when an error isencountered. RGB Source ProfilesRGB*, Gamma 1.5, Gamma 1.8, Gamma 2.4, None, and Download ProfileThis setting allows you to define the characteristics of the RGB profile (color datarepresented using the RGB (Red Green Blue) color model) that is appropriate foryour monitor, used when printing color images or graphics in a document. Thisensures that the machine uses the most appropriate color conversion whenprinting color documents using the CMYK (Cyan Magenta Yellow blacK) colormodel.sRGBThis setting specifies the industry standard definition for generic Windows (PC)monitors. If you are using an sRGB compatible monitor, you can print out colorsclose to how they appear on your monitor.Gamma 1.5, Gamma 1.8, and Gamma 2.4These settings enable you to select the gamma correct level of the RGB data. Thehigher the value, the darker the printout.NoneWhen this setting is selected, device-dependent RGB data is converted intoCMYK without the machine applying the RGB color model.
