LandscapePrints the document by rotating it 90 degrees relative to the paper feed direction.You can change the rotation direction by going to the Maintenance tab, opening the CustomSettings dialog box, and then using Rotate 90 degrees left when orientation is [Landscape]check box.To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees leftwhen orientation is [Landscape] check box.Print QualitySelects your desired printing quality.Select one of the following to set the print quality level that is appropriate for the purpose.To set the print quality level individually, click the Main tab, and for Print Quality, select Custom. TheSet... becomes enabled. Click Set... to open the Custom dialog box, and then specify the desiredsettings.HighGives priority to print quality over printing speed.StandardPrints with average speed and quality.DraftThis setting is appropriate for test printing.Paper SourceShows the source from which paper is supplied.Rear TrayPaper is always supplied from the rear tray.CopiesSpecifies the number of copies you want to print. You can specify a value from 1 to 999.Important• When the application software that you used to create the document has the same function,specify the settings on the printer driver. However, if the print results are not acceptable, specifythe function settings on the application software.Always Print with Current SettingsPrints documents with the current settings starting from the next print execution.When you select this function and then close the printer driver setup window, the information that youset on the Quick Setup, Main, and Page Setup tabs are saved and printing with the same settings ispossible starting from the next print execution.Important• If you log on with a different user name, the settings that were set when this function was enabledare not reflected in the print settings.• If a setting was specified on the application software, it has priority.DefaultsRestores all the settings you have changed to their default values.Click this button to return all settings on the Quick Setup, Main, and Page Setup tabs to their defaultvalues (factory settings).356
