Components Guide 45The indicator on the back of the camera lights or blinks under thefollowing conditions.This camera is equipped with a power saving function. The power willshut off in the following circumstances. Press the power button again torestore power.* This time can be changed.IndicatorGreen: Ready to shoot (camera beeps twice)*/connected tocomputer/display offBlinking Green: Camera starting up/Time Lapse (movie) recording/Image recording/reading/erasing/transferring (whenconnected to a computer/printer)Orange: Ready to shoot (flash on)Blinking Orange: Ready to shoot (camera shake warning)* Camera beeps once if difficult to focus.Never do the following while the indicator blinks green. Theseactions may corrupt image data.- Shake or jolt the camera- Turn off the camera, or open the memory card slot/batterycoverPower Saving FunctionShooting Mode Powers down approximately 3 minutes after thelast control is accessed on the camera. The LCDmonitor automatically turns off 1 minute* afterthe last control is accessed even if [Auto PowerDown] is set to [Off]. Press any button other thanthe power button or change the cameraorientation to turn the LCD monitor back on.Playback ModeConnected to a PrinterPowers down approximately 5 minutes after thelast control is accessed on the camera.z The power saving function will not activate during a slideshow or while the camera is connected to a computer.z The power saving function settings can be changed (p. 51).EC231CUG-E.book Page 45 Thursday, June 7, 2007 10:22 AM
