Instruction manual Wi3150Please keep this instruction manual for future reference16INSTALLING THE HANDLERemove the door gasket on the drilled holes side by pulling from the top corner.(see below drawing). Fix the handle to the screws and push the gasket backinto place.Visit our caple website to view a ‘How to video’ at www.caple.co.uk.INSTALLING THE DECORATIVE FRAMETake out the decorative frame and the brackets from the accessories box. Fix thebrackets to the cabinet with screws provided and fix both sides of the decorativeframe to the brackets with the 2 supplied screws as shown in below diagram.the bar handlee door gasket on the drilled holes side to install the handle. (see below drawing). Fixto the screws and push the gasket back into place.the decorative framee decorative frame and the brackets from the accessories box. Fix the brackets to thescrews provided and fix both sides of the decorative frame to the brackets with the 2ews as shown in below diagram.!ScrewScrewDecorativeframeThe decorativeframe bracketFront BackNote: To be installedwith a 150mm plinthheight.If you wish to reduceyour plinth height, thesmaller, slot-on plinthgrille (see page 17)should be used.