Car Navi PRO TV Hardware Manual
            | |
3 Basic Operation3 1 Battery and Charger3.1.1 Power SupplyIn-vehicle/portable GPS navigation has two ways of power supply: battery supply and powersupply.When the device doesn't connect with the adaptor, it is supplied by the lithium battery. Theicon at the top right corner on the main interface of system indicates the currentremaining power.When the device connects with the adaptor, it is supplied by the outer power.3.1.2 Car charger1.2. Connect the other end with the cigarette lighter of the car in order to supply power andcharge up the device at the same time.3 2 Basic Use3.2.1 Power Key1. Power on:When the GPS power is full or after connecting the device with outer power supply, press thepower key for few seconds to start up.2. Sleep mode:When the device turns on, press the power key for several seconds to enter into sleep mode,the GPS will automatically display the last state when next start-up.Connect one end of the car charger with power input jack of device.3.2.2 Reset Key / Power-saving KeyWhen the system has no response,1. There are delay and stagnation during switch interface;2. There is no response when click the icons.3. Power key is unavailable.3.2.3 Car MountThe car mount consists of salver and bracket. While using the device in car the device shouldbe fixed in the proper position of fore-windshield.3.2.4 Micro SD Memory CardCorrectly insert Micro SD card into the slot, and do not remove the Micro SD card duringoperation.3 3 Connection with ComputerConnect the device with computer by the USB cable. One end connects with PC and theother end connects with the device.1. Data transmission: There are two new "mobile disk" icons in “my computer” after thedevice is successfully connected with computer, the first icon stands for the built-in flashmemory of the device, the second stands for the Micro SD card storage of the device. (If theMicro SD card is not inserted, the second icon of the disk is unavailable). Then, you can usethem as normal USB flash disk.Press the reset button and then press Power key to re-start the system, the performances are as below:Tips【Tips】 Under normal condition(volume and backlight at 50％), itcan last about 2.5~3.5 hours after the battery is fully charged. Somefunctions need to consume a lot of battery energy, such asaudio/video playing, high backlight and Bluetooth, which may reducethe using time.【Caution】 Please insert the car charger after car starting up in orderto avoid the damage of the device while starting up.Caution【Caution】 Please backup the data before resetting the system.Caution【Attention】 Please choose the proper position to place the carmount. Do not block the driver's view and place the device arbitrarilywithout fixing; do not fix the device in the area that the airbagCaution-7- -8- |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine