Carat C 2067 Operating Instructions Manual
                                                                        | |
"TRANSLATION OF THE ORIGINAL INSTRUCTIONS"Voltage: 230V 50Hz~Power absorbed: 1000WAdmissible working conditions:INTERMITTENT - S3 50%-SERVICE30 sec. under load running30 sec. restRotation speed: 2800 min -1Capacitor: 18 μFIP Degree: 54Thermal circuit breaker: 170°CTool:CONTINUOUS CROWN DIAMOND BLADEWET CUTTINGDiameter: Ø200 mmCentre hole: 25,4 mmMax. cutting depth: 40 mmWater recirculation pump: S0 230V 50/60HzRecommended use:CERAMIC, SINGLE-FIRED CERAMIC, COTTOAND MARBLE (max. thickness 20 mm.)Weight:37 Kg 41 KgTank capacity (min/Max):12 / 15,5 Lt 15 / 19,5 LtMax. cut length:670 mm 900 mmMax format tile for diagonal cut:450 x 450 mm 620 x 620 mmMachine dimensions:660 x 1070 x h. 1200 660 x 1300 x h. 1200The noise level emitted by the machine has beenmeasured in conformity with the EN3745.LW standard – SOUND POWER LEVEL = 71.4/0.0dB(A) /mW(A)LOP – SOUND POWER LEVEL AT THEOPERATOR’S POSITION=62.7 dB(A).The measurements were taken without any loadand at the maximum speed using a cutting tool ofdiameter 200mm. continuous crown type.In working conditions the machine has a noiseemission of more than 85 dB(A).GB27Technical dataC 2067 C 2090C 2067 C 2090 |
Related manuals for Carat C 2067
manualsdatabase
Your AI-powered manual search engine