Cardinal Detecto DM15 Operation Manual

Contents

Page 5PRICE LOOK UP (PLU)PLU ProgrammingProgramming PLU without a Tare Weight1. Press the PLU PGM key2. Press the PLU key (PLU1 – PLU14) or enter the PLU number (15-99) to programmed.3. Press ENTER4. Enter the UNIT PRICE and press ENTER twice.Programming PLU with a Tare Weight1. Press the PLU PGM key2. Press the PLU key (PLU1 – PLU14) or enter the PLU number (15-99) to programmed.3. Press ENTER4. Enter the UNIT PRICE and press ENTER5. Enter the known Tare weight or place the empty container on scale and press ENTER.PLU Operation1. Press the key for the desired PLU (PLU1-PLU14 key or PLU key then number 15-99)2. The PLU Unit Price will be displayed.3. If a Tare weight is programmed for the selected PLU, the Weight displayed will benegative and the NET annunciator illuminated.4. Place the commodity on the scale. Be sure to use the proper container if a Tare weightis programmed.5. The Total Price will be displayed.6. Remove the commodity, the scale will exit the PLU and return to zero weight.Pre-Pack Operation with PLUFor repetitive price-computing of commodities with the same unit price.1. Select the desired PLU as above.2. Press the PRE-PACK key. The PRE-PACK annunciator will illuminate.3. Place commodities on scale and proceed with operation.4. Repeat until all commodities have been weighed.5. When the pre-packing operation is ended, press the CLEAR key to turn off PRE-PACKmode and exit PLU.

/ 12

Related manuals for Cardinal Detecto DM15