Cardinal HSDC series Operation Manual

Contents

4SCALE OPERATION, ContScale Component IdentificationPress to turn the scale off. The auto-shutoff feature will turn the scale off automatically aftera preselected time of inactivity (no motion).Press to place the scale in the gross weight display mode (net indicator off).Press to enter a new tare weight value equal to the current scale weight. The scale willautomatically enter the net weight display mode (net indicator on).Press to enter the net weight display mode without entering a new tare weight value (netannunciator on).Press to turn the scale on. If on, press to zero the weight display up to the preset zero limit(4% or 100% of the scale capacity).The membrane keyboard is not to be operated with pointed objects (pencils, pens,fingernails, etc). Damage to keyboard resulting from this practice will NOT be coveredunder warranty.AnnunciatorsNET Illuminated to indicate the scale is in the net weight mode. If it is off, it indicates thatthe scale is in the gross weight mode.LO BAT Illuminated to signal that the batteries should be replaced.ZERO Illuminated to show that the scale weight is within 1/4 graduation of the center of zero.TARE WEIGHT ENTRYThe HSDC has an automatic tare feature that allows you to enter tare weight up to the three leastsignificant digits of the scale capacity. This tare weight feature is often used to subtract the emptycontainer weight or other unwanted fixed weight values from the weight reading. See the PUSHBUTTON TARE setup mode section to activate this feature.The following table lists the maximum tare weight allowed for each model of the HSDC scale.MODEL CAPACITY MAXIMUM TARE WTHSDC-500 500 lb X 0.2 lb 99.8 lbHSDC-200 200 lb x 0.1 lb 99.9 lbHSDC-100 99.95 lb x 0.05 lb 9.95 lbHSDC-40 40 lb x 0.02 lb 9.98 lbHSDC-20 20 lb x 0.01 lb 9.99 lbHSDC-100KG 99.95 kg x 0.05 kg 9.95 kgHSDC-40KG 40 kg x 0.02 kg 9.98 kgHSDC-20KG 20 kg x 0.01 kg 9.99 kgTABLE 1OFFTARETNETNGROSSGONZERO 0•••