PC Unit Section General Setup and OperationAlaris System User Manual – with v9.33 Model 8015 1-3Modules can be attached to either side of the PC unit or toeither side of another module. The process to attach or detachis the same for either side, whether attaching/detachingto/from a PC unit or another module.An individual hospital/facility can choose to permanently attachmodules. To remove permanently attached modules, contactqualified service personnel.Inserting a finger or other objectinto the IUI connector, when the module is attached to the PCunit, could result in electrical shock.The Alaris System is designed to operate a maximum offour infusion or monitoring modules. Modules added in excessof four are not recognized by the system. The Auto-ID modulecan be included as a fifth module. A module can be attachedin any position; however, when mounted on an IV pole, it isrecommended that a balanced configuration be maintained.Application of adhesive tape or other materials to the sides ofthe PC unit and modules can prevent proper latching.1. Position free module at a 45° angle, aligning IUIconnectors.General Setup and OperationAttach and Detach ModuleAttach Module Inserting a finger or other object intothe IUI connector, when the moduleis attached to the PC unit, couldresult in electrical shock.WARNING45°IUI ConnectorFront ViewAligned IUI ConnectorsTop ViewTop ViewIUI Connectors Not Aligned