Carrier 17 Start Up & Operation Manual

Contents

Table 2 — LID Screens (cont)EXAMPLE 7 — SERVICE1 DISPLAY SCREENTo access this display from the LID default screen:1. Press MENU .2. Press SERVICE .3. Scroll down to highlight EQUIPMENT SERVICE.4. Press SELECT .5. Scroll down to highlight SERVICE1.6. Press SELECT .DESCRIPTION CONFIGURABLE RANGE UNITS REFERENCE POINT NAME DEFAULT VALUEMotor Temp Override* 150-200 (66-93) DEG F (DEG C) mt over 200 (93)Cond Press Override 90-200 (620-1379) PSI (kPa) cp over 125 (862)Refrig Override Delta T 2-5 (1-3) DEG F (DEG C) ref over 3D (1.6D)Chilled Medium Water/Brine medium WATERBrine Refrig Trippoint 8-40 (–13.3-4) DEG F (DEG C) br trip 33 (1)Compr Discharge Alert 125-200 (52-93) DEG F (DEG C) cd alert 200 (93)Bearing Temp Alert 165-210 (74-99) DEG F (DEG C) tb alert 210 (99)Water Flow Verify Time 0.5-5 MIN wflow t 5Oil Press Verify Time 15-300 SEC oilpr t 15Water/Brine Deadband 0.5-2.0 (0.3-1.1) DEG F (DEG C) cw db 1.0 (0.6)Recycle Restart Delta T 2.0-10.0 (1.1-5.6) DEG F (DEG C) rcycrdt 5 (2.8)Recycle Shutdown Delta† 0.5-4.0 (.27-2.2) rcycsdt 1.0 (0.6)Surge Limit/HGBP Option 0/1 srg hgbp 0Select: Surge=0, HGBP=1Surge/HGBP Delta T1 0.5-15 (0.3-8.3) DEG F (DEG C) hgb dt1 1.5 (0.8)Surge/HGBP Delta P1 30-170 (207-1172) PSI (kPa) hgb dp1 50 (345)Min. Load Points (T1/P1)Surge/HGBP Delta T2 0.5-15 (0.3-8.3) DEG F (DEG C) hgb dt2 10 (5.6)Surge/HGBP Delta P2 30-170 (207-1172) PSI (kPa) hgb dp2 85 (586)Full Load Points (T2/P2)Surge/HGBP Deadband 1-3 (0.6-1.6) DEG F (DEG C) hgb dp 1 (0.6)Surge Delta Percent Amps 10-50 % surge a 25Surge Time Period 1-5 MIN surge t 2Demand Limit Source 0/1 dem src 0Select: Amps=0, Load=1Amps Correction Factor 1-8 corfact 3Motor Rated Load Amps 1-9999 AMPS a fs 200Motor Rated Line Voltage 1-9999 VOLTS v fs 460Meter Rated Line KW 1-9999 kW kw fs 600Line Frequency 0/1 HZ freq 0Select: 0=60 Hz, 1=50 HzCompr Starter Type REDUCE/FULL starter REDUCECondenser Freeze Point –20-35 (–28.9-1.7) DEG F (DEG C) cdfreeze 34 (1)Soft Stop Amps Threshold 40-100 % softstop 100Stop to Start Timer† 3-50 MIN stopmtr 20NOTE: D = delta degrees.*Information is applicable to hermetic machines only.†Information is applicable to open-drive machines only.31 1197→