Carrier 30RBV Installation Instructions Manual

3 00DCG000169400AEnglishMounting instructions - FixingThe WUI control comes with the Wall plate used forsupport of the remote control. The user interface comes with its wall mount. The wall mount bracket must be secured with a setscrew - plugs (slotted countersunk flat FS Ø: 04mm, diameter: 05 mm), not supplied, using theoblong holes spotted on the support. Provide 2 cables about 2 wires out of the wallOne for communication BUS (A)One for supplying the User Interface (B)Both are requiring your attention as polaritymatters. Before wiring on terminal block, refer to IOM fordetails on how to connect wires and to respectpolarity.Wall plate frame dimensions - mounting on the wallFigure 2: Wall mounted plate frameWhere to locate WUI on the wall?When the user interface is configured as a room thermostat, it is essential to place the user interface within the habitatin the mood control, away from heat sources (fireplaces, radiators sun rays), drafts (windows and doors) andpassageways.5 mm250 mm(A) (B)