Carrier 30RQ Operation And Maintenance Instructions

Also see for AQUASnap 30RB: Manual Installation, operation & maintenance instructions Installation instructions Installation, operation and maintenance instructions Controls and Troubleshooting

Contents

Carrier 30RQ Operation And Maintenance Instructions Manual pdf 10 page image

10Modifying the value of a parameterOperation value Press button Menu LED Item number2-digit displayItem 4-digitdisplayHold on the MENU button until the LED for SETPOINT lights. 00Press one of the Arrow buttons until the two-digit display shows 1 (item number 1- cooling setpoint 2).The value for setpoint 2 is displayed in the four-digit display (6.0°C in this example).116.0Press the Enter button for more than 2 seconds to enable the value associated with item 1 to bemodified. The Setpoint menu LED and the two-digit display flash indicating that modification mode isactive.6.0Keep pressing the Down Arrow button until the value 5.7 is displayed in the four-digit display. TheSetpoint menu LED and the two-digit display keep flashing.5.95.85.7Press the Enter button again to validate the change. The new setpoint is 5.7°C.The Setpoint menuLED and the two-digit display stop flashing, indicating that modification mode no longer applies.1 5.74.3.4 - expand displayPressing the Enter button causes a 23 character text expan-sion to be scrolled across the four-digit display. All usermenus provide an expansion of the current displayedparameters. If the expansion is complete the four-digitdisplay reverts to item value. This function can be inhibitedthrough the User Configuration menu.1111