Carrier 38BNB Owner's Manual

Contents

Carrier 38BNB Owner's Manual Manual pdf 7 page image

7Unit Operation (Fig. 13) — In the event that the remotecontrol is not working or has been misplaced, the unit willoperate as follows:40BN018,024,030 — Units always operate by the remotecontrol. If you lose or break the remote, the unit will continueto operate but settings cannot be changed until you get a newremote control.To Turn Unit Off — Push the Operation Push Button locatedunder the front cover. See Item I, Fig. 13. The AUTO/OFFindicator light will go off.To Turn Unit On — Push the Auto/Off button located underthe front cover. See Item I, Fig. 13. The AUTO/OFF indicatorlight will light. The unit will operate at the settings that havebeen programmed using the remote control.40BN036 — Unit will operate according to predeterminedfactory settings.To Turn Unit Off — Slide the Operation Switch on the unit(Item I, Fig. 13) to the OFF position.To Turn Unit On — Slide the Operation Switch on the unit(Item I, Fig. 13) to the AUTO position. The unit will operate ata temperature setting of 74 F and will automatically select therequired operation mode and fan speed to maintain this setting.Fig. 13 — Indoor Unit Display Panel FeaturesFEATURE DESCRIPTIONA Infrared Receiver Receives transmissions from the remote controller.B FILTER Indicator Light Lights when the air filters require cleaning.C (ON)/(AIR COND Indicator Light Lights when the air conditioner operates. Flashes when defrosting.D TIMER Indicator Light Lights when a TIMER Start or Stop time is set.E POWER Indicator Light Lights when the air conditioner is connected to the electricity supply of the properline voltage.G SERVICE Indicator Light Lights or flashes accordingly to the malfunction. (See further information onpage 11).IOperation Push Button(40BN018,024,030)• Turns the air conditioner ON (Auto) Mode and OFF without Remote Control.• Resets unit after malfunctions and resets the Filter indicator light. (Press the but-ton continuously for 5 seconds.)Operation Slide Switch(40BN036)• Turns the air conditioner ON (Auto) Mode and OFF without Remote Control.• Resets unit after malfunctions and resets the Filter indicator light. (Slide OperationSwitch to OFF position for 5 seconds and then return the switch to remote.)• Operates the air conditioner using the remote controller when the operation switchis in REMOTE position.40BN018,024,030 40BN036