Carrier 40MBC/38MAQ Installation Instructions Manual

Contents

13INSTALLATION OF THE DECORATION PANELDetach the intake grill1. Slide the two grille hooks toward the middle of thedecoration panel.1 Intake grille2 Grille hook12Fig. 24 --- Intake Grille2. Open the intake grille and remove.Fig. 25 --- Open Intake GrilleInstall the decoration panel1. Align the indication marks “ ” on the decoration panel tothe indication marks “ ” on the unit.2. Attach the decoration panel to the unit with the suppliedscrews (see Fig. 26).1 Decoration panel2 Screws (M5)(supplied with the panel)12Fig. 26 --- Attach the Decoration Panel3. After installing the decoration panel, ensure there is no spacebetween the unit body and the decoration panel. Otherwise airmay leak through the gap and cause dewdrops (see Fig. 27).Fig. 27 --- Eliminate Space4. Mount the intake grille. Ensure the buckles at the back ofthe grille are properly seated in the panel’s groove.Fig. 28 --- Mount the Intake Grille5. Connect the decoration panel’s two wires to the unit’smainboard.10-core wire5-core wireFig. 29 --- Connect two wires