Carrier 40MHH Owner's Manual

Also see for 40MHH: Owner's manual Owner's manual

Contents

8Timer FunctionTIMER ON (to start the unit) and TIMER OFF (to stop the unit)can be used separately or together.Timer ON onlyThis function allows the unit to start automatically at the set time.The TIMER ON can be set while the unit is on or off.UNIT ONa. Press the TIMER ON button to initiate the auto-on timesequence. The set time is displayed in the remote controldisplay. Every time the TIMER ON button is pressed, thetime increases by 30 minutes, up to 10 h. It increases by 60minutes, afterwards, until the time setting reaches 24 h.b. When the TIMER ON is set, the TIMER light on unitilluminates. The unit continues to run at the set time.UNIT OFFa. Set the timer described in the UNIT ON section.b. The unit starts at the set time.Adjust the TIMER ON settings to 0.0 to cancel this option.Timer OFF onlyThis function allows the unit to stop automatically at the set time.The timer can be set while the unit is on or while it is off.UNIT ONa. Press the TIMER OFF button to initiate the auto−offtime sequence. The set time appears on the remote controldisplay. Every time the TIMER OFF button is pressed, thetime increases by 30 minutes, up to 10 h. It increases by 60minutes, afterwards, until the time settings reach 24 h.b. When the TIMER OFF is set, the timer light on the unitilluminates and the unit turns off automatically at the set time.UNIT OFFa. Set the TIMER off as described in the UNIT ON section.The TIMER display on the unit illuminates and the unitremains off.b. Adjust the TIMER ON settings to 0.0 to cancel thisoption.Timer ON and Timer OFFUse both functions to program the unit to turn on and shut off atspecified times.UNIT OFFa. Set TIMER ON as previously described.b. Set TIMER OFF as previously described. The unit startsautomatically at the set TIME ON and turns off at the setTIME OFF.UNIT ONa. Set TIME OFF as previously described.b. Set TIME ON as previously described. The unit turns offautomatically at the set TIME OFF and turns on at the setTIME ON.Sleep ModeSLEEP mode is used to conserve energy and can be used whenthe unit is in the COOL, HEAT or AUTO mode only.Cool Modea. Push SLEEP. After 1 hour the set point raises by 1.8F(1C). After another hour, the set point raises by another1.8F (1C) and the fan runs in a low speed. The unitshuts off 5 hours after setting the SLEEP mode. TheSLEEP mode cancels if either the “Mode”, “TEMP”,“Fan”, “Timer”, or “On/Off” buttons on the remotecontrol is pressed.Heat ModeSame as COOLING mode however set points are lowered by1.8F (1C).Turbo ModeUse the TURBO mode to cool or heat the room rapidly.a. Press TURBO. An audible “beep” is heard if the indoor unitsupports this function. The fan runs on super high speed. TheTURBO mode terminates automatically 20 minutes afterpushing TURBO. It can be terminated immediately bypushing TURBO again. When the TURBO mode isterminated, the unit reverts to the original setting.