Carrier 40VM Series Installation And Operating Instructions Manual

Also see for 40VM Series: Installation and operating instructions Installation and operating instructions Service manual Installation and operating instructions

Contents

installation preparation

3INSTALLATIONInstallation Preparation —1. There are three fresh air openings on the different side of the kit as show on the Fig 4.2. The inlet is a knockout. Select one, two, or three sides in advance and knockout the openings.3. The installation of the kit and the unit is shown in Fig. 5.4. Follow the indoor unit installation manual to mount the indoor unit. Connect piping and wiring.12 351.42.4-way cassette3.4-way cassette outside air kit4.5.CeilingDuct of the outside airPanel/GrilleFig. 4 —3 Fresh Air Openings Fig. 5 —Installation of Kit and UnitInstallation Process — Remove the screws as shown below:a.b.Remove the two screwsRemove the hookc.Install one of the screwsNOTE: Remove screws and hook according to the diagram, and retain the screws for outside air kit installation.Fig. 6 —Remove Screws

/ 6

Related manuals for Carrier 40VM Series