|
42PQV4Infrared remote controlRemove the used batteries and insert new batteries.The remote control uses two alkaline batteries (1.5 V, LR03x2).Press the reset button O with a sharp object to reset the remotecontrol.Do not use used batteries or batteries of different types, as thismay cause the unit to malfunction.Batteries should only be changed after turning OFF the unit.The average battery life during normal use is approximately one year.If the air conditioner does not operate normally after replacing thebatteries, remove the batteries, refit them and press thereset button O again after 5 seconds.The maximum operating range for the remote control is approx. 5 m.No obstructions such as curtains or plants should be betweencontrol and unit.Direct sun on the unit receiver may interfere with good signalreception.The control must be directed toward the unit receiver whenpressing the buttons of the desired functions. An acousticalacknowledgement sound (beep) will indicate that signal has beenreceived.The remote control operates with two 1.5 V non re-chargeablebatteries.When the symbol appears in the display, this indicates thatthe batteries are exhausted.How to insert batteries:Open embedded cover. Remove the cover of the batterycompartment at the back of the remote control by pressing the tabtoward inside, in the direction of the arrow.Display readoutA. Mode selection buttonB. ON/OFF buttonC. Increase temperature buttonD. Decrease temperature buttonE. Fan speed selection buttonF. Powerful mode buttonG. Economical mode buttonH. Louvre control button (Flap)I. ON timer buttonJ. DAILY timer button (Everyday)K. Cancel timer buttonL. OFF timer buttonM. Sleep timer button (night)N. Current time adjusting buttonO. Reset button PreviousNext |